About the product 1. Replacement LCD display + touch screen digitizer assembly (TFT Material) for Samsung Galaxy J7 (2017)/J7 Pro J730F/DS, J730FM/DS,AT&T; 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display

1. Suitable for Microsoft Surface Pro 6 / Pro 5 (2017) / Pro 4 2. This charger has over heating protection and short circuit protection 3. Cable and pin can be used to provide consistent charging 4. Small and light weight design is convenient for everyone to carry 5. Get for the office, home and travel 6. Power: 44W 7. Input: 100-240V, 1.5A, 50-60. Hz 8. Output: 15V/2.58A, 5V/1A 9. Cable length: about 1.7m

1. Back cover replacement for Samsung Galaxy A5 (2017) / A520. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

1. High quality SIM card tray & Micro SD card tray for Samsung Galaxy A5 (2017) / A520 & A7 (2017) / A720. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Samsung Galaxy J730 / J7 (2017) / J7 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display

About the product 1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy J3 (2017) / J330. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display

About the product 1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy A5 (2017), A520F, A520F/DS, A520K, A520L, A520S. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display

About the product 1. Replacement LCD display + touch screen digitizer assembly (TFT Material) for Samsung Galaxy A3 (2017), A320FL, A320F, A320F/DS, A320Y/DS, A320Y. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display

1. Concise: it is simply shaped and turned to leave a pure and comfortable impression on everybody. 2. Functional: the leather case can fit your tablet well and make a big difference on protecting your i. Pad 9.7 (2018) & i. Pad 9.7 (2017)from scratch, shock, slip and so on. 3. Convenient: all buttons and ports are accessible. 4. Portable: it is unnecessary for you to take it off once your i. Pad 9.7 (2018) & i. Pad 9.7 (2017)puts it on because it is quite thin and light. 5. Durable: with good performance and high quality, it may work for a long time. 6. Cost-effective: a very suitable price have been set for the case. It is an affordable product. 7. Fashionable: owing to the artful design, such as the custer texture, Sleep / Wake-up function and 3-folding holder design, the case is very stylish and popular

Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD display assembly for Apple Macbook Pro Retina 13 A1706 A1708 Late 2016 ~ 2017 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Вертикальный многоступенчатый насосный агрегат Calpeda MXV 50-2017 купить в Москве, цена от 556 320 RUB: 👍 расходные материалы, аксессуары, характеристики, инструкции | 🔥 Рассрочка | 🚛 Доставка в любой регион России

Рукав напорный с нитяным усилением 6х 14-1,6 ГОСТ 10362-76. Диаметр 6х 14. Низкая цена. Доставка по Москве и России